Builders Edge 130110010069 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Builders Edge 130110010069 herunter. Builders Edge 130110010069 Installation Guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Mount Master Utility Block
Installation Instructions
Part No. PAFMGULRxxx
-To be installed prior to siding
Step 1
Remove the trim ring from the Block Assembly.
See Figure 1A.
Figure 1A
Step 3
Place the Block over the desired application. Be sure
to place tape or sealant between the Block and the
house. Attach the Block using an 8d nail or equivalent
with a minimum of ten attachments (eight attachments
around the outside of the part and two attachments on
the inside of the electrical box). See Figure 2
below for proper fastener locations.
Step 4
Cut the siding around the Block. Install the siding
according to the manufacturer's installation instructions.
See Figure 3 below.
Step 5
Install the trim ring by locking it into place.
See Figures 4A and 4B.
Figure 4A
Figure 4B
Step 6
Mount the fixture to the Mount Master Utility Block.
Be sure that all electrical product gaskets have the
proper sealant.
Figure 3
Step 2
Determine where wires will come through wall and
remove the corresponding knockout in the black
electrical box. Score the perimeter of the round knock-
outs from the inside of the box with a utility knife.
Knock out from the back of the box using a screw
driver as a chisel. Align the hole with the wires.
-Maximum 20 lb. light fixture
I-0035
PAPC8869
01-03-06
U.L. Listed
Figure 2
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Mount Master Utility Block

Mount Master Utility BlockInstallation InstructionsPart No. PAFMGULRxxx -To be installed prior to sidingStep 1 Remove the trim ring from the Block A

Kommentare zu diesen Handbüchern

Keine Kommentare